3.5" x 5" x 1" Wrapped Rigid Two Piece Box

The Specs:

- Bottom: 3.588"x5.88"x1"

- Top: 3.625"x5.625"x1"

- Thickness: 50pt Chipboard

- Finish: Soft Matte

- Printing: Full Color Top and Bottom 

Design Guidelines and Tips

All artwork must be submitted on our print ready templates that are available for download below. Please ensure your top is designed to be on the TOP part of the template, and the same applies for the bottom. Template sheets should be 13"x19" and at least 300dpi while you are designing, and then ensure those settings are applied in your saving/exporting as well. For a better quality product please follow the safe zone recommendations shown on the die for all important text and artwork so nothing runs too close to the edges or folds on the box. Finally, make sure the bleed area is filled in to match/mirror your artwork, and hide all of our template layers and die lines. 

Custom Card Stock Inserts:

- Our standard insert for Poker/Bridge cards is an insert that splits the box in half, and sits 0.75" tall, perfect for 108 card decks.

- We have an insert made for 3.5"x3.5" square cards so they do not move around in the box.

- If you have a smaller deck of poker/bridge cards we have an insert made so that one deck of around 54 cards fits in the box and does not move around freely, with room for rules on top.

- If you have a custom insert design in mind then feel free to reach out and we can confirm if we can make it, and then there are no additional fees for that custom insert.

REMEMBER TO BLEED YOUR ARTWORK AND REMOVE TEMPLATE LAYER BEFORE SAVING YOUR DESIGN FILE!